500X Quad Flyer Combo Kit ( GU-INS ) 222007

500X Quad Flyer Super Combo Kit ( GU-INS ) 222007 Contenido del Kit

• Quad Flyer Main Frame
  
• 4pcs 10inch propellers (222800)
  
• 4pcs GUEC GM-412 BL Motor 960kV (222413)
  
• 4pcs GUEC GE-183 18A ESC( 222183)
  
• GU-INS (Inertial Navigation System) with GPS functions 924500
• Protection Frame (222241)
  
• Screw Driver Tool
  
• Nylon/Leather Storage Carrying Bag (222850)
  

500X was designed based on UAV, advantages are:

1. Flight Efficiency: Standard Battery
(2S2000mAh) time of flight for more
than 12min, with a high-capacity battery,
the flight time will be more than 20 min
or more (available spreadsheet
calculation)

2. Excellent wind resistance: the efficiency
and load of propeller are perfectly
optimized, so the wind resistance will be
better than general electric aircraft

3. Additional payload capabilities: payload
up to 2200g (total lift-up weight), can
freely install cameras and video recorder,
and other general systems.

4. Operation mode and flight characteristics
are same as helicopter, but no complex
transmission.

5. Collapsible body design, greatly reduce
the damage rate, can be repaired easily.

GU-INS was a inertial navigation system combined
with GPS system, designed for X-type flying
Quad-copter, emphasized features are:

1. Easy to install and setup, no need of
software on PC for adjustment.

2. All functions can be setup &
confirmed by LED lights indication.

3. All in one design (combined inertial
measurement unit and main
controller) with simple cable wiring.

4. OSD (On-screen display, optional
purchase module) electronics can be
connected to GU-INS, which
provides precise data monitoring on
altitude, distance, position, attitude
and battery voltage.

5. GU-INS provides pitch and rolls
output signals, can work with
different types of camera gimbals.
Powered by: (v) Battery: type (LiPo) qty. (1)

• GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X), it can be extended for use on Hexa-copter, Octo-copter etc…. (Please reference GAUI product version/optional purchase module).

• OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.

• Onboard USB interface connector for firmware update.

• Interface provided to connect with standard receiver and JR satellite receiver.

• GU-INS Specifications:
• Dimensions:Main controller: 53.5 x 38.5 x 12mm
  GPS antenna: 42 x 34 x 15mm
  Weight:Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
• Frequency: 300Hz output to ESC
• Operating temperature: -20~80°C
• Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
• Rate (manual) mode: Max angular velocity: 300 degree/sec
• Auto balance mode: Max tilt angle: 60 degree.
• GPS positioning mode:
• Hovering accuracy: Horizontal: ±2m, Vertical: ±0.5m
• Max yaw angular velocity: 250 degree/sec
• Max tilt angle: 45 degree.
• Max horizontal speed: 10 m/s,36 km/hr
• Max vertical speed: 8 m/s (horizontal posture)
• GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
• Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
• Suitable wind condition: < 10 m/s

• Features:
• Easy to install and setup, no need of software on PC for adjustment.
• All functions can be setup & confirmed by LED lights indication.
• All in one design (combined inertial measurement unit and main controller) with simple cable wiring.

Delivery content:
500X Quad Flyer Main Frame
4pcs 10inch propellers
4pcs GUEC GM-412 BL Motor 960kV
4pcs GUEC GE-183 18A ESC
GU-INS Inertial Navigation System
Protection Frame
Screw Driver Tool
Nylon/Leather Storage Carrying Bag

Encontré en Youtube estos GU-INS Videos :

Optional Accessory:
2S1P, 7.4V/ 2000mAh ~ 4S1P,14.8V
4000mAh LiPo battery