Hobbies y mas Online Tienda Chile O.T.C/Accesorios Upgrade products

240mm landing pole 6.000 $ CLP

240mm landing pole

CRANE 2 Camera Gimbal SET 159.000 $ CLP

crane gaui 500X 330X

Suitable Model	330X.500X.Other	�Standard Accessories	�	Optional Accessory	V
Key Features:	- 6061 CNC Metal. - 100% Full Carbon Fiber Frame. - Special engineered design provides more precise and stable movement while filming. - Highly precise moving platform, track design with double bearings makes it perform extremely smooth. - Ultra light weight and rigid design. - Two servos are included. Size: 125 x 115 x65 Weight:� 97g Side tilt:�� 22.5 degrees Vertical tilt:�� 120 degrees
Delivery content	CRANE 2 Camera Gimbal SET x 1pcs SERVO x 2pcs (Futaba S3156)

CRANE 3 Camera Gimbal SET 289.000 $ CLP

GAUI crane 3 500x GU-INS

- 6061 CNC Metal. - 100% Full Carbon Fiber Frame. - Special engineered design provides more precise and stable movement while filming. - Highly precise moving platform, track design with double bearings makes it perform extremely smooth. - Ultra light weight and rigid design. - Two servos are included. Size: 170 x 160 x 75 Weight:� 312g Side tilt:�� 18.5 degrees Vertical tilt:�� 60 degrees
Delivery content	CRANE 3 Camera Gimbal SET x 1pcs SERVO x 2pcs (GUEC GS-503、GUEC GS-504)

�

20cm Extension cable para GPS GU-INS 4.000 $ CLP

20cm Extension cable para GPS Receiver System ( GU-INS )

GAUI GU-OSD NTSC [ On Screen Display ] 51.000 $ CLP

GAUI GU-OSD On Screen Display for GU-INS

GU-OSD electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.

Attitude
Flight mode
Number of satellites received
Residual battery capacity
Altitude
Speed
Operating time

also provides a radar chat to represent relative distance and heading direction of the aircraft to "Home" position for your reference while flying.

1x GU-OSD NTSC (directly powered by GU-INS main unit)
2 x Connection cable

5.0mm Llave hexagonal de tubo 8.000 $ CLP

GAUI 5.0mm Llave hexagonal de tubo Hexagon socket wrench

GU-INS Inertial Navigation System GPS 0 $ CLP

GAUI GU-INS Inertial Navigation System GPS

GU-INS ( Inertial Navigation System ) con GPS

GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X), it can be extended for use on Hexa-copter, Octo-copter etc…. (Please reference GAUI product version/optional purchase module).

OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.

Onboard USB interface connector for firmware update.

Interface provided to connect with standard receiver and JR satellite receiver.

Specifications:

Dimensions:Main controller: 53.5 x 38.5 x 12mm
GPS antenna: 42 x 34 x 15mm
Weight:Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
Frequency: 300Hz output to ESC
Operating temperature: -20~80�C
Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
Rate (manual) mode: Max angular velocity: 300 degree/sec
Auto balance mode: Max tilt angle: 60 degree.
GPS positioning mode:

Hovering accuracy: Horizontal: �2m, Vertical: �0.5m
Max yaw angular velocity: 250 degree/sec
Max tilt angle: 45 degree.
Max horizontal speed: 10 m/s,36 km/hr
Max vertical speed: 8 m/s (horizontal posture)

GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
Suitable wind condition: < 10 m/s

Features:

Easy to install and setup, no need of software on PC for adjustment.
All functions can be setup & confirmed by LED lights indication.
All in one design (combined inertial measurement unit and main controller) with simple cable wiring.

GAUI GU-INS Instruction Manual

500X Quad Flyer Upgrade Kit 89.000 $ CLP

Unbenanntes Dokument

500X Quadrocopter Quadcopter Quad Flyer Upgrade Kit

( No incluye Motors, ESCs, GU-344, storage bag )

500X was designed based on UAV, advantages are:�

1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation)�

2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft�

3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle. �

4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system.�

5. Operation mode and flight characteristics are similar to helicopter, but no complex transmission�

6. Collapsible body design, greatly reduce the damage rate, which can be repaired easily.

Note: For users who has transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers.
10 inch propellers are for use with standard 500X motors/ESCs.

It is able to use 2S/1400mah~2000mah LiPo for normal flight without payload,�it is recommended to use the 3S LiPo for the 500X if the total flying weight is over 900g.�Refer to the Power Efficiency Table to select the battery which come with proper capacity.�

Flying Weight(g)	Battery	Power Consumption(w)	Efficiency(g / w)
800	2S	80	10
900	2S	92	9.8
1000	3S	113	8.8
1100	3S	129	8.5
1200	3S	146	8.2
1300	3S	163	8
1400	3S	182	7.7
1500	3S	202	7.4
1600	3S	219	7.3
1700	3S	238	7.1
1800	4S	276	6.5
1900	4S	306	6.2
2000	4S	329	6.1
2100	4S	343	6.1
2200	4S	370	6

The payload above includes the weight of battery, the weight of 500X itself is about 670g.�

* The payload calculations and the battery options :�

Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)"�

CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flying time carefully, OVER discharging of battery during flight may damage your battery and cause flight control failure of the Quad Flyer.

500X 4-in-1 Power Connector 6.000 $ CLP

500X 4-in-1 Power Connector

330-FX Canopy Quadrocopter para 330X 32.000 $ CLP

330-FX Canopy Quadrocopter para 330X

120mm landing pole 6.000 $ CLP

120mm landing pole

Boom anchor(para landing poles) 7.000 $ CLP

Boom anchor para landing poles

FPV platform 5.000 $ CLP

FPV platform

Quadrocopter LED Light Set 24.000 $ CLP

Quadrocopter LED Light Set: 2 White LED 2 Red LED y 4 transparent covers

Power extension cable para 330X power system 5.000 $ CLP

cable para 330X power system

Hexagon screw driver Set 13.000 $ CLP

Unbenanntes Dokument

Especificaciones:

Handle
Hexagon Screw Driver head 1.5mm
Hexagon Screw Driver head 2.0mm
Hexagon Screw Driver head 2.5mm
Hexagon Screw Driver head 3.0mm
Hexagon Screw Driver head 1/16�
Hexagon Screw Driver head 3/32
Hexagon Screw Driver head 0.05�
Hexagon Screw Driver head 5/64
PH0 Philips Screw Driver head
PH00 Philips Screw Driver head
Straight-edge Screw Driver head 1.5mm
Straight-edge Screw Driver head 2.5mm

�

120T Main Gears(Bevel ) 0 $ CLP

120T Main Gears ( Bevel )

Socket Head Button Screw - Black (Semi) 0 $ CLP

Socket Head Button Screw - Black (Semi)

X5 16T Steel Pinion Gear Pack (Bevel ) 0 $ CLP

X5 16T Steel Pinion Gear Pack (Bevel )

X5 15T Steel Pinion Gear Pack (Bevel ) 0 $ CLP

X5 15T Steel Pinion Gear Pack (Bevel )